How Do You Seal Ceramic Tile And Grout?

Even after professional sealing and filling of tiles, you can’t avoid the fact that grout has absorbent properties. It the main reason behind the dirt, dust and staining on the grout. moreover, moisture on the grout can buildup mold and mildew easily. So, you need to consider all the tile sealing techniques to keep it free of stains and bacteria.

Sealing offers better protection against stains and dirt. For this, try to seal the grout properly after installing the new grout. but seal it when the grout dries properly. Apart from this, you need to seal the grout at least once per year to increase the life-span of the grout.

Table of Contents

A Few Considerations For Professional Sealing Melbourne Services:

Sealing is the best option only for ceramic tiles and grout. but it’s not a suitable choice for the synthetic types of tiles and grout. Because these tiles don’t require any kind of tile sealing. That’s why it’s better to avoid sealing these types of tiles for better protection.

Moreover, don’t do it even after re-grouting and recoloring. Because tile sealer after dying can harm the grout instead of protecting.

Clean Properly Before Sealing:

Before sealing or even resealing, clean the tiles and grout properly. You need to deep clean your grout before resealing. Moreover, cleaning with the help of chemicals can breakdown the old sealing in the grout.

On the other hand, the tile sealer also breaks over time. So, you should do it at least once per year. But keep in mind, clean the grout properly before sealing tile. Otherwise, dust will stick into the grout and joint lines permanently and it’s hard to remove stains in the future.

Types Of Grout Sealers:

There are two types of sealers penetrating sealers and non-penetrating sealers. So, to seal the small area it’s better to use the small and soft brushes to cover all the joints and lines. you need to choose the sealer accordingly the type of tile grouts.

Penetrating Sealer:

This type of sealer allows the water and moisture to penetrate the grout. grout has absorbent property. So, it absorbs the sealer and offers resistance against water and moisture. That’s why penetrating sealers are the best choice for the bathroom and shower tiles.

N0n-Penetrating Sealer:

This type of sealer used to create a coat or layer over the grout to resist the water. So, these types of sealers are the best choices for the kitchen. As it doesn’t allow the water to penetrate under the grout or tiles that can cause mildew and mold.

Non-penetrating sealers are the best for the natural stone and slate tiles as well. However, these sealers are not a good option for glazed tiles. So, if you are looking for this sealer for bathroom and shower tiles then it’s not a good option.

But it can a suitable option if you are using it for penetrating the grout. Moreover, if you are sealing the wide-area then wide brushes are the best applicators.

Best Way To Apply Sealer:

There are three basic types of tile sealing Melbourne applications such as paint roll or spray. Although, painting and rolling are the same ways. However, it depends on the selection of a sealing tool. Moreover, it’s difficult to apply the tile sealer with the help of a simple brush. Because you can reapply the sealer on the dry areas easily.

Apart from painting and spraying, rolling is not a good choice especially, for the corners and joint areas. Moreover, after rolling, you need to spend more time cleaning the tiles and grout. so, you should not prefer to use it if you are not a professional.

When Should You Reseal Grout?

It’s better to reseal the grout area at least once per year. Because all the sealers become fade, dull and break over time due to scrubbing and hard cleaning chemicals. Therefore, it’s better to get the tile sealing Melbourne services at least once per year.